ELYRIA
   

FLAT ROOF

MSP-1 FLAT ROOF SEALANT

APPLICATION METHOD
At 50 to 75 PSI, spray MSP-1 evenly over the flat roof section to be recoated. Application rate is approximately 30 sq. ft. per gallon. There is a 24 hour material cure time before being exposed to rain. Roof surface temperature should be 50deg F or higher during application.

CURED PRODUCT
Foot traffic on cured material is not recommended when surface temperature exceeds 80deg F. Raised walkways to HVAC and other mechanicals are recommended to protect cured material.

PREPARATION OF SURFACE
All surfaces to be recoated must be free of moisture and debris. All breaches should be patched using bituminous patching material.

440-353-9809 (office)
Architects & Engineers
For More Information Call
440-353-9809
P.O. Box 472
ELYRIA, OH 44036
office@masonryseal.com